27.5″ WHEELS / 165MM REAR / 170MM FRONT

The Revel team created the Rail with two things in mind: maximum thrills and climbing hills. A tuned carbon layup makes railing through berms pure joy. The Rail will put an end to the traditional trail bike compromises to ascent efficiency to which you’ve grown accustomed. The Canfield Balance Formula is the heart of every Revel bike, which maximizes the amount you pedal in the sweet spot and keeps the suspension wildly active while descending and braking. Read more about our technology here, or ride a Rail for yourself and get hooked.

 

BUILD OPTIONS

FEATURES

CBF (Canflied Balanced Formula) suspension

CBF™ focuses on designing rear suspension around the Center of Curvature (CC). CBF points the chainline and corresponding drive forces around the top of the chainring through 100-percent of the travel resulting in maximum pedaling efficiency, regardless of where you are in the travel, what terrain you are on or what kind of power you’re putting down. All the power you put into the pedals goes into turning the rear wheel, allowing the suspension to do its job completely independent of drivetrain and braking forces and making the sag setting much less critical.

Carbon Layup Tech

Revel uses a mix of Japanese Toray T700 and T800 fibers in the frames, but the real magic that makes the bike so good is in the angles. Most bike frames use a selection of 0-, 45-, and 90-degree fibers, since these are the most readily available and easiest to work with. Revel optimizes their frame using more 30/60-degree fibers, which, when laid up properly, creates stronger and stiffer tubing and shapes, using less material.

Integrated Revel Chain Guide

Details! Revel wanted to create a super-stealthy, ultra-effective chain guide. This lil’ guy will hold your chain on your chainring and is super easy to adjust—all while maintaining the simplicity and clean aesthetic. Optimized around SRAM DUB cranks and BBs.

Internal Routing

Revel uses the best method for internal routing in the biz! Revel’s full-carbon tubes are molded in one piece onto the inside of the carbon frame tubes. Not only does this provide structural improvement to the frame, it also allows you to route an entire frame in about a minute. No rattling, no noise, and no fishing cables out of frames. 

PHOTOS

FRAME SPECS

 

 SPECS  
 Wheel Size  27.5”(650b)
 Front Travel  170mm
 Rear Travel  165mm
 Shock Spec  230×65-22.2 x 8 Hardware Spec
 Boost Axles  148mm rear / 110mm front
 Seatpost Diameter  31.6mm
 Seatpost Insertion Depth  SM (260mm), MD (275mm), LG (290mm), XL (305mm)
 Bearings  BOLU 6801 VRS full complement, 12mm x 21mm x 5mm 18pcs per  bike
 Rear Brake  180mm post mount / 203mm max
 Tire Clearance  27.5×2.5″ (CEN Standard: 2.4″)
 Bottom Bracket  Threaded (73mm English threaded)
 Max Chainring  34T Round / 32T Oval, 52mm Chainline
 Chainguide  Custom Revel guide included
 Tapered Headtube  IS42 upper / IS52 lower
 Colors Tuxedo Penguin/ Mint Chocolate Chip/ Tang
 Sizes  S / M / L / XL
 Frame Warranty  Lifetime Warranty(Details HERE)

GEOMETRY

VIDEOS